Titel
Title
| CAE-Projekt |
Modulcode
Module Code
| CAEP |
Modulverantwortliche
Responsible Members of Staff
| |
Kompetenzziele des Moduls
Module Competence Goals
|
Bei erfolgreicher Teilnahme können die Studierenden die Finite Elemente Methode (FEM) verstehen und anwenden, die gewählte Vorgehensweise analysieren und deren Ergebnisse bewerten, die Verbesserungen und deren Umsetzung als Weiter- oder Neukonstruktion empfehlen. | With the successfull participation, the students are able to understand and to use the Finite Element Analysis (FEA), to analyse the choosen strategy and to validate the results, to recommend the optimizations and their implementation in further developments. |
|
Lehrinhalte
Content
|
* Grundlegendes Einarbeiten in die FEM durch Reproduktion von vorgeführten kleinen Berechnungsbeispielenvon durch den Dozenten
* Weitere Vertiefung in die FEM durch Nachvollziehen von schon gelösten größeren Problemen, die in Form von fertigen Manualen zur Verfügung stehen, unter ständiger Begleitung durch den Dozenten
* Lösung einer Projektaufgabe unter eigenständiger Anwendung des zuvor gelernten, Bewerten der Ergebnisse und ggf. Veränderung des Lösungsweges mit Unterstützung durch den Dozenten bei Bedarf
* Ausdenken von positiven Optimierungen der berechneten Konstruktion und das Überprüfen durch erneute Berechnung völlig eigenständig im Idealfall fast ohne Dozentenhilfe | * Basical introduction in the FEA through the reproduction of presented small simulation examples by the lecturer
* Additional consolidation in the FEA through the reconstruction of already solved greater problems, presented in form of finished manuals, under permanent support by the lecturer
* Solution of the project task under independent application of knowledge learned before, evaluation of the results and ggf. modification of the solution path with support by the lecturer as needed
* Construction of positive optimizations of the calculated design and validation through calculation again ideally fully independent without help of the lecturer |
|
Lehrende
Lecturers
| |
Lehr- und Lernmethoden
Teaching Format
| Projekt, Modulbezogene Übung (MÜ) |
Lernform
Study Format
| Präsenzstudium, angeleitetes Selbststudium |
Prüfungsform
Examination
| Projektarbeit (PA) |
Prüfungsdauer
Test Duration
| |
Voraussetzungen für die Teilnahme
Required Experience
|
Siehe aktuelle
Prüfungsordnung
|
Verwendbarkeit
Applicability
| In allen technisch orientierten Studiengängen |
Studentische Arbeitsbelastung
Hours
| 56 + 124 |
Präsenzstudium
Contact Hours per week
| 56 |
Selbststudium
Self Study Hours
| 124 |
ECTS-Leistungspunkte
ECTS-Credits
| 6 |
Häufigkeit des Angebotes
Frequency
| 2 Mal / Studienjahr im 5. und 6. Semester |
Sprache
Language
| Deutsch |
Bemerkungen
Comments
| Keine Bemerkung |
Literatur
Literature
|
Die aktuellen Literaturlisten werden zu Beginn des Semesters verteilt.
|
Angebot
Courses
|
Semester | Studiengang | SWS | Form | Gültigkeitsbeginn | Gültigkeitsende | Wahlpflicht |
5 | ENTEC | 4 | Projekt | 2016 | 2100 | Pflichtmodul |
5 | LUR | 4 | Projekt | 2004 | 2100 | Pflichtmodul |
5 | MAWIC (IMEC) | 4 | Projekt | 2008 | 2100 | Pflichtmodul |
5 | TRE | 4 | Projekt | 2004 | 2006 | Pflichtmodul |
6 | DMPE | 4 | Projekt | 2008 | 2016 | Wahlpflichtmodul |
6 | FERT | 4 | Projekt | 2004 | 2010 | Pflichtmodul |
6 | GIM | 4 | Projekt | 2004 | 2007 | Pflichtmodul |
6 | M | 4 | Projekt | 2011 | 2100 | Pflichtmodul |
6 | MDIG | 4 | Projekt | 2022 | 2100 | Pflichtmodul |
7 | DMPE | 4 | Projekt | 2017 | 2100 | Wahlpflichtmodul |
|